Description
The VOLCANO MEDIC 2 is an advanced development of the VOLCANO MEDIC. It boasts the following advantages over its predecessor:
- Inhalation through the Tube Kit or Valve Balloon
- Very fast heating process within 1 – 2 minutes
- The control panels are integrated in the large display and can be controlled via touch button
- 2 year warranty + 1 year warranty upon registration
Like its predecessor, the VOLCANO MEDIC 2 allows the inhalable medical application of liquid cannabinoids dissolved in alcohol and of cannabinoids directly from dried hemp flowers.
The VOLCANO MEDIC 2 Vaporisation System solves two medical technology problems at once.
First, the VOLCANO MEDIC 2 Vaporisation System allows for the inhalant medical use of liquid cannabinoids dissolved in alcohol.
Second, it allows for the inhalant use of cannabinoids directly from dried cannabis flowers. Cannabinoids are released simply through the effects of heat in the VOLCANO MEDIC 2 Vaporisation System. Flowers are not burned as they are when smoked. This prevents the formation of toxic combustion substances.
Tips for optimal use
For optimal use, follow these step-by-step instructions:
- Preparation: Turn the Filling Chamber Cap counter clockwise to remove it from the Filling Chamber. If using dronabinol (THC) dissolved in alcohol, remove the Screens from the Filling Chamber as they are not needed.
- Filling Pad: Insert the Filling Pad into the Filling Chamber instead of the lower Screen. The Filling Pad will hold the dronabinol (THC) dissolved in alcohol.
- Adding Dronabinol (THC) Solution: Turn the Filling Chamber upside down and use a pipette to drop the dronabinol (THC) dissolved in alcohol onto the centre of the bottom of the Filling Pad. The Filling Pad can hold up to 10 drops. Start with a maximum of two drops at the beginning of treatment and carefully increase to the appropriate dosage as recommended by your doctor.
- Reassemble: Once the dronabinol (THC) solution is added, screw the Filling Chamber Cap back on.
- Separating Alcohol: Place the Filling Chamber with the cap on the Hot Air Generator and screw it on clockwise. Switch on the heater (HEAT) and adjust the set temperature to 100°C (212°F). Let it heat up until the actual temperature reaches 100°C (212°F). Then press the touch button labelled ‘AIR’ to pump air through the Filling Pad. The alcohol will evaporate quickly within 30 seconds, leaving only the dronabinol behind.
- Vaporisation: Once the alcohol is separated, adjust the set temperature to 210°C (410°F) and continue heating. The dronabinol vaporises at higher temperatures, over 157°C (315°F), ensuring effective vaporisation while avoiding the inhalation of alcohol.
Reviews
There are no reviews yet